GQ Electronics Technical Support Forum
.


GQ Electronics Technical Support Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
Password:
Save Password
Forgot your Password?

 All Forums
 GQ Electronics Forums
 2.GQ Geiger Muller Counter
 WiFi password can't use >
 New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

tehaynes

3 Posts

Posted - 05/27/2020 :  00:49:53  Show Profile  Reply with Quote
The command processor of the GMC-500+ stops receiving input after seeing > until the command closes out with >>

Example commnad:
<GETVER>reandom suff>can be anything>>
get interpreted as
<GETVER>>
This makes it impossible to use > in any test input field that uses ASCII for the parameter, including the WiFi SSID and password. This can not be worked around using AT commands as the AT command is still processed by the command processor before being passed to the ESP8266.

I tried the escape sequence /> but it still stopped after the / character. Is there another escape sequence for >?
Reply #1

EmfDev

1245 Posts

Posted - 05/27/2020 :  09:18:35  Show Profile  Reply with Quote
Hi tehaynes, can you email me your serial number so I can send you a firmware update?
Go to Top of Page
Reply #2

tehaynes

3 Posts

Posted - 05/31/2020 :  06:14:14  Show Profile  Reply with Quote
I have updated to from 2.10 to 2.20. It is still not possible to use '>' in any ASCII fields.
Go to Top of Page
Reply #3

EmfDev

1245 Posts

Posted - 06/01/2020 :  11:07:47  Show Profile  Reply with Quote
Hi tehaynes, the > looks like is not present in teh GMC500 character list in the current firmware. Maybe try to set it using the data viewer and just connect to WiFi to see if works.
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
GQ Electronics Technical Support Forum © Copyright since 2011 Go To Top Of Page
Generated in 0.16 sec. Snitz's Forums 2000