| Author |
 Topic  |
|
|
mimichris
France
21 Posts |
 Posted - 02/28/2025 : 06:00:33
|
Hi,
When I start my GMC-500, it displays anything, jumps from 5CPM to 4800CPM and to 2850CPM.....and this without stopping, it seems to be broken, it has been a long time since I used it. |
Maxime |
|
| Reply #1
EmfDev
2320 Posts |
Posted - 02/28/2025 : 14:22:16
|
| try to do a factory reset. If still does not work, tube may need to be replaced with m4011 / j321 |
 |
|
| Reply #2
mimichris
France
21 Posts |
Posted - 03/01/2025 : 01:40:37
|
quote:
Originally posted by EmfDev
try to do a factory reset. If still does not work, tube may need to be replaced with m4011 / j321
Hi, Factory reset done, didn't change anything, still the same problem. |
Maxime |
|
|
| Reply #3
EmfDev
2320 Posts |
Posted - 03/03/2025 : 11:15:56
|
| need to change the tube. |
|
|
| Reply #4
mimichris
France
21 Posts |
Posted - 04/15/2025 : 04:13:02
|
Hi,
I changed the tube but I couldn't find a black tube, it seems to work well, I tried the old tube on another Geiger counter and it works, I didn't make any comparative measurements but the gas is inside otherwise it wouldn't work. Strange......... |
Maxime |
|
|
| Reply #5
EmfDev
2320 Posts |
Posted - 04/15/2025 : 13:02:28
|
| you can use a black shrink wrap instead. or check for light sensitivity if you need to do it. |
|
|
| Reply #6
big.goph009
Turkey
1 Posts |
Posted - 04/23/2025 : 19:34:11
|
Sounds like your GMC-500 is having a real nightmare! Those CPM jumps are scarier than a jumpscare in https://fnaf.one/ ! It's definitely not behaving normally. Since it's been idle for a while, perhaps the sensor is malfunctioning. I'd suggest checking the battery first, and then maybe contacting the manufacturer for troubleshooting. Hope you can fix it before it turns into a Five Nights at Freddy's situation with your equipment!
|
|
|
| |
Topic |
|
GMC-500
