GQ Electronics Technical Support Forum Active Users: / Visits Today:
Highest Active Users:
GQ Electronics Technical Support Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
 Password:
Save Password
Forgot your Password?

 All Forums
 GQ Electronics Forums
 2.GQ Geiger Muller Counter
 GMC-300E realtime clock, is not correct		  New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

harlan

USA
23 Posts
Posted - 11/12/2013 :  09:07:13  Show Profile  Reply with Quote
"The main board also has a real-time clock for all time related data log" I want to read the real-time clock for logging my data and the Real-time clock give me the same time over and over. I need it to be a real-time clock, not a bad watch..

What can I do??
Harlan
NETC.com
Reply #1

ZLM

1261 Posts
Posted - 11/12/2013 :  11:03:17  Show Profile  Reply with Quote
Those are real-time clock access commands from protocol guide:


22. Set year date and time
command: SETDATETIME[YYMMDDHHMMSS]

23. Get year date and time
command: GETDATETIME


You need to stop all other data transmission(such as CPM, Heardbeat very second report, etc. ), then send those commands. Otherwise the data data from unit would mix together.

try the re2.07 Data Viewer, it has GETDATETIME in Other setting menu.

http://www.gqelectronicsllc.com/download/GQGMCDataViewer2.07.exe

Use this one to check with your GMC-300E.
Go to Top of Page
Reply #2

harlan

USA
23 Posts
Posted - 11/25/2013 :  11:16:52  Show Profile  Reply with Quote
Thanks for the help. Tried a different GMC-300E and it work fine. Sent unit back for repair.
Harlan
Harlan
NETC.com
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
GQ Electronics Technical Support Forum © Copyright since 2011 Go To Top Of Page
Generated in 0.08 sec. Snitz's Forums 2000