GQ Electronics Technical Support Forum


GQ Electronics Technical Support Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
Password:
Save Password
Forgot your Password?

 All Forums
 GQ Electronics Forums
 1.Geiger Counter World Map(www.GMCmap.com)
 How to : direct link to my location
 New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

menno

Netherlands
4 Posts

Posted - 07/28/2018 :  03:40:04  Show Profile  Reply with Quote
HI there
is there a way to have a direct url to my location ?
i have tried like this : hxxp://www.gmcmap.com/index.asp?id=xxxxxx
but that wont do it

can anybody help me with this ?
thanks
menno
Reply #1

hiro

34 Posts

Posted - 07/30/2018 :  11:22:34  Show Profile  Reply with Quote
Hi Menno

If you want the map to center at your location, please set your location correctly when you register.
If you want to see your device's history data, please go to gmcmap.com/historyData.asp?Param_ID=********(substitute *s with your geiger counter id)

Thanks!
Go to Top of Page
Reply #2

donghelan

Japan
61 Posts

Posted - 01/20/2019 :  06:17:26  Show Profile  Reply with Quote
Hi Hiro, Menno, I also used Timezone parameter before but that doesn't seem to work now. You have similar experience?

I.e.: add this at the end when you are in Japan :&systemTimeZone=9 does not give the expected change from UTC into JST.
Example: www.gmcmap.com/historyData.asp?Param_ID=7472099179&systemTimeZone=9
Also this wrong header is still there: Date (GMT-7:00). Should be UTC or GMT as long as the TimeZone does not (want to) change.


To bug or not debug, that is the Q

Edited by - donghelan on 01/20/2019 06:18:43
Go to Top of Page
Reply #3

EmfDev

800 Posts

Posted - 01/22/2019 :  09:54:03  Show Profile  Reply with Quote
@donghelan, Have you tried editing your profile with the timezone?
Go to Top of Page
Reply #4

hiro

34 Posts

Posted - 03/29/2019 :  13:27:34  Show Profile  Reply with Quote
@donghelan,
The time zone setting was for your convenience to enter a time zone once then you don't have to edit the systemTimeZone every time,

I just changed the display for the wrong header so it should work now.
The logic is like if you put something in the systemTimeZone parameter then the page is using the parameter, otherwise it uses your time zone in your setting.

If you have more questions we are always ready to help and thanks for using GQ device!
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
GQ Electronics Technical Support Forum © Copyright since 2011 Go To Top Of Page
Generated in 0.09 sec. Snitz Forums 2000