| Reply #2
EmfDev
2355 Posts |
 Posted - 09/09/2025 : 10:47:32
|
EEPOM_PowerOnOff,
EEPOM_AlarmOnOff,
EEPOM_SpeakerOnOff,
EEPROM_IdleDisplayMode,
EEPROM_BackLightTimeoutSeconds,
EEPROM_IdleTitleDisplayMode,
EEPROM_AlarmCPMValueHiByte,
EEPROM_AlarmCPMValueLoByte,
EEPROM_CalibrationCPMHiByte_0,
EEPROM_CalibrationCPMLoByte_0,
EEPROM_CalibrationuSvUcByte3_0,
EEPROM_CalibrationuSvUcByte2_0,
EEPROM_CalibrationuSvUcByte1_0,
EEPROM_CalibrationuSvUcByte0_0,
EEPROM_CalibrationCPMHiByte_1,
EEPROM_CalibrationCPMLoByte_1, //15
EEPROM_CalibrationuSvUcByte3_1,
EEPROM_CalibrationuSvUcByte2_1,
EEPROM_CalibrationuSvUcByte1_1,
EEPROM_CalibrationuSvUcByte0_1,
EEPROM_CalibrationCPMHiByte_2,
EEPROM_CalibrationCPMLoByte_2,
EEPROM_CalibrationuSvUcByte3_2,
EEPROM_CalibrationuSvUcByte2_2,
EEPROM_CalibrationuSvUcByte1_2,
EEPROM_CalibrationuSvUcByte0_2,
EEPROM_IdleTextState,
EEPROM_AlarmValueuSvByte3,
EEPROM_AlarmValueuSvByte2,
EEPROM_AlarmValueuSvByte1,
EEPROM_AlarmValueuSvByte0,
EEPROM_AlarmType,
EEPROM_SaveDataType,
EEPROM_SwivelDisplay,
EEPROM_ZoomByte3,
EEPROM_ZoomByte2,
EEPROM_ZoomByte1,
EEPROM_ZoomByte0,
EEPROM_SPI_DataSaveAddress2,
EEPROM_SPI_DataSaveAddress1,
EEPROM_SPI_DataSaveAddress0,
EEPROM_SPI_DataReadAddress2,
EEPROM_SPI_DataReadAddress1,
EEPROM_SPI_DataReadAddress0,
EEPROM_nPowerSavingMode,
EEPROM_nSensitivityMode,
EEPROM_nCOUNTER_DELAY_HiByte,
EEPROM_nCOUNTER_DELAY_LoByte,
EEPROM_nDisplayContrast,
EEPROM_MAX_CPM_HIBYTE,
EEPROM_MAX_CPM_LOBYTE,
EEPROM_nSensitivityAutoModeThreshold,
EEPROM_nLargeFontMode,
EEPROM_nLCDBackLightLevel,
EEPROM_nReverseDisplayMode,
EEPROM_nMotionDetect,
EEPROM_bBatteryType,
EEPROM_nBaudRate,
EEPROM_nCPMSpeakerOnOffCalib,
EEPROM_nGraphicDrawingMode,
EEPROM_nLEDOnOff,
EEPROM_nHCPMCAL,
EEPROM_nSaveThresholdValueuSv_m_nCPM_HIBYTE,
EEPROM_nSaveThresholdValueuSv_m_nCPM_LOBYTE,
EEPROM_nSaveThresholdMode,
EEPROM_nSaveThresholdValue3,
EEPROM_nSaveThresholdValue2,
EEPROM_nSaveThresholdValue1,
EEPROM_nSaveThresholdValue0,
EEPROM_SSID_0,
//...
EEPROM_SSID_63 = EEPROM_SSID_0 + 63,
EEPROM_Password_0,
//...
EEPROM_Password_63 = EEPROM_Password_0 + 63,
EEPROM_Website_0,
//....
EEPROM_Website_31 = EEPROM_Website_0 + 31,
EEPROM_URL_0,
//....
EEPROM_URL_31 = EEPROM_URL_0 + 31,
EEPROM_UserID_0,
//...........
EEPROM_UserID_31 = EEPROM_UserID_0 + 31,
EEPROM_CounterID_0,
//....
EEPROM_CounterID_31 = EEPROM_CounterID_0 + 31,
EEPROM_Period,
EEPROM_WIFIONOFF,
EEPROM_TEXT_STATUS_MODE,
EEPROM_FAST_ESTIMATE_TIME,
EEPROM_THIRD_PARTY_OUTPUT, //for sending 0xFF per count via serial. This data format used on NETC.com software
EEPROM_HIGH_VOLTAGE_LEVEL_TUBE1,
EEPROM_HIGH_VOLTAGE_LEVEL_TUBE2,
EEPROM_CPM_TUBE_MODE,
EEPROM_CPM_TUBE_DISPLAY,
EEPROM_VOLTAGE_DISPLAY,
EEPROM_DEADTIME_ENABLE,
EEPROM_DEADTIME_TUBE1_HIBYTE,
EEPROM_DEADTIME_TUBE1_LOWBYTE,
EEPROM_DEADTIME_TUBE2_HIBYTE,
EEPROM_DEADTIME_TUBE2_LOWBYTE,
EEPROM_MEDIUMTHRESHOLD_HB,
EEPROM_MEDIUMTHRESHOLD_LB,
EEPROM_HIGHTHRESHOLD_HB,
EEPROM_HIGHTHRESHOLD_LB,
EEPROM_SpeakerVolume,
EEPROM_HV_READING,
EEPROM_TARGET_HV_MSB,
EEPROM_TARGET_HV_LSB,
EEPROM_HV_CALIB,
EEPROM_SS1_0,
EEPROM_SS1_5 = EEPROM_SS1_0 + 5,
EEPROM_SS2_0,
EEPROM_SS2_5 = EEPROM_SS2_0 + 5,
EEPROM_SS3_0,
EEPROM_SS3_5 = EEPROM_SS3_0 + 5,
EEPROM_SS4_0,
EEPROM_SS4_5 = EEPROM_SS4_0 + 5,
EEPROM_ACCURACY_DISPLAY,
EEPROM_DOSE_ALARM_0,
EEPROM_DOSE_ALARM_1,
EEPROM_DOSE_ALARM_2,
EEPROM_DOSE_ALARM_3,
EEPROM_LANGUAGE,
EEPROM_CALIBRATION_CPM_MSB_0,
EEPROM_CALIBRATION_CPM_LSB_5 = EEPROM_CALIBRATION_CPM_MSB_0 + 23,
EEPROM_CALIBRATION_USV0_BYTE3,
EEPROM_CALIBRATION_USV5_BYTE0 = EEPROM_CALIBRATION_USV0_BYTE3 + 23,
EEPROM_DOSIMETER_UNIT,
EEPROM_Save_DateTimeStamp,
EEPROM_Save_DateTimeStamp_SS = EEPROM_Save_DateTimeStamp + 5,
EEPROM_MaximumBytes, |
 |
|
New GMC counter configuration?
