|T O P I C R E V I E W
||Posted - 07/15/2018 : 02:21:40
How could I configure the GMC-320+V5 using the Wifi connection rather than the USB port ?
It would be nice to remotely control the unit using the network when placed at inaccessible or difficult to access location.
This requires Telnet or SSH basic server probably.
Thanks for your feedback if any.
|3 L A T E S T R E P L I E S (Newest First)
||Posted - 07/16/2018 : 11:15:07
This feature though can't be implemented on the GMC-320 V5 because of its lack of memory.
||Posted - 07/16/2018 : 09:49:39
EmfDev, thanks for your reply.
That would be a nice feature
Will it be also possible to refit the existing GMC-320 with newer firmware and how ?
||Posted - 07/16/2018 : 08:50:27
This unit is not capable of doing that. The WiFi feature in only for logging data to the GMC-MAP.
But remotely controlling the unit with the WiFi network might be implemented in the future.