GQ Electronics Technical Support Forum Active Users: / Visits Today:
Highest Active Users:
GQ Electronics Technical Support Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
Password:
Save Password
Forgot your Password?

 All Forums
 GQ Electronics Forums
 3. GQ EMF EF Meter RF Spectrum Power Analyzer
 How to differentiate RF source on same spectrum?
 New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

The Invisible Rainbow

15 Posts

Posted - 03/25/2022 :  08:08:50  Show Profile  Reply with Quote
How to differentiate RF source on same 2.4GHz spectrum?

I am interested in identifying Bluetooth 4.0 Low Energy (LE) (2.4GHz - 2.4835GHz) - IoT BT Mesh network technology. Is there any way to differentiate Bluetooth LE, wireless router and microwave oven as they all operate on 2.4GHz spectrum? An emission source description at time of RF occurrence would make things clearer.

https://www.bluetooth.com/learn-about-bluetooth/tech-overview/

https://en.wikipedia.org/wiki/Bluetooth_Low_Energy#Technical_details

https://www.youtube.com/watch?v=5EKoEcSnXP0

I am interested in using the Digital RF browser to analyse bytes (packets) sent by Bluetooth Low Energy for IoT applications.
Reply #1

EmfDev

2132 Posts

Posted - 03/25/2022 :  12:55:16  Show Profile  Reply with Quote
It will be hard to implement and may need additional hardware.
Go to Top of Page
Reply #2

The Invisible Rainbow

15 Posts

Posted - 03/29/2022 :  01:20:14  Show Profile  Reply with Quote
So differentiation of emission source would be difficult because all devices are using the same 2.4GHz spectrum?

Does the Digital RF browser analyse wireless data packet traffic sent in bytes; but not other non-data devices?
For example, it would register data bytes sent from a wireless internet router, but it would not register with a microwave oven as their is no data being sent.

Thus, it should be able to pick up on Bluetooth Low Energy data packets in bytes too?
Go to Top of Page
Reply #3

EmfDev

2132 Posts

Posted - 03/30/2022 :  10:06:33  Show Profile  Reply with Quote
It may need a decoder. A phone can do it by just scanning around for WiFi or bluetooth signals.

Generally it detects RF levels/pulses (data or non-data) and just estimates the bytes.

It should be able to pick up RF as long as it is strong enough for it to be detected. It is hard to distiguish bluetooth/wifi/phone/microwave by the RF level since you can move one farther away or closer to vary the signal strength.

Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
GQ Electronics Technical Support Forum © Copyright since 2011 Go To Top Of Page
Generated in 0.06 sec. Snitz's Forums 2000