| Reply #3
rfrazier
USA
44 Posts |
 Posted - 08/14/2020 : 19:51:14
|
Be sure to look at the owners manual on the company website to get familiar with the menu controls. If holding the device horizontal with the buttons to the right, the buttons are, from the top, POWER, UP, DOWN, BACK. To change screen modes, press the BACK button to get a menu. Use the arrow buttons to select a screen. Either wait for it to set or press the POWER button briefly to set. I'm assuming you're talking about magnetic fields, which this instrument refers to as EMF.
* On the all in one screen, press UP repeatedly until the main display shows EMF.
* On the vertical mode screen, and now holding vertically, press the UP button (now pointing right) until it selects EMF/EF. Press the DOWN button (now pointing left) to switch between EMF and EF.
* On the table mode screen, now holding horizontally, press the UP button until it selects EMF/EF. You can read total EMF and EMF in each axis.
* On the emf graphs screen, press the UP button until it selects EMF/EF to read total EMF or press the UP button until it selects XYZ-EMF to read the EMF in each axis.
Ron
|
-----
Ron Frazier - In training with the Building Biology Institute (https://buildingbiologyinstitute.org/) to become an independent Electromagnetic Radiation Specialist (EMRS). We measure, document, analyze, and recommend mitigations for harmful EMF exposures.
All my statements are mine alone though.
|
 |
|
Measuring ELF
