GQ Electronics Technical Support Forum Active Users: / Visits Today:
Highest Active Users:
GQ Electronics Technical Support Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
Password:
Save Password
Forgot your Password?

 All Forums
 GQ Electronics Forums
 1.Geiger Counter World Map(www.GMCmap.com)
 Spikes in cpm
 New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

dgmshelby

USA
3 Posts

Posted - 09/17/2019 :  18:01:21  Show Profile  Reply with Quote
Anyone know why the cpm spikes are going on around the usa on the Geiger counter world map for USA and on my GQ 500+, Norm. is 40cpm has been as high as 180cpm for 1 or2 min.This has been going on for weeks anyone? Has not been the norm here in the past.
Reply #1

EmfDev

2131 Posts

Posted - 09/18/2019 :  08:59:19  Show Profile  Reply with Quote
Hi dgmshelby, did you see it going high on your unit or on the map?
Go to Top of Page
Reply #2

dgmshelby

USA
3 Posts

Posted - 09/18/2019 :  11:38:00  Show Profile  Reply with Quote
quote:
Originally posted by EmfDev

Hi dgmshelby, did you see it going high on your unit or on the map?

ON my GQ500+ also
Go to Top of Page
Reply #3

EmfDev

2131 Posts

Posted - 09/18/2019 :  12:06:57  Show Profile  Reply with Quote
Have you tried to factory reset your device?
Go to Top of Page
Reply #4

dgmshelby

USA
3 Posts

Posted - 09/18/2019 :  13:03:20  Show Profile  Reply with Quote
quote:
Originally posted by EmfDev

Have you tried to factory reset your device?

I will give that a try.
Go to Top of Page
Reply #5

EmfDev

2131 Posts

Posted - 09/18/2019 :  13:18:51  Show Profile  Reply with Quote
You can also try to turn on cpm 1 and 2 display by going to the tube settings. We need to make sure it's not tube noise.
Go to Top of Page
Reply #6

Badger

USA
4 Posts

Posted - 11/15/2019 :  09:16:21  Show Profile  Reply with Quote
Hi there. My 500+ has suddenly been spiking in the 100-300 range for the past month or so too. Only one other data provider for me to see in my area of Iowa, but they are not spiking. Normally I’m in the 30-40’s. Did you ever resolve your issue?
Go to Top of Page
Reply #7

EmfDev

2131 Posts

Posted - 11/15/2019 :  10:09:19  Show Profile  Reply with Quote
Hi Badger, is it spiking on your GMC unit or on the map? Please turn on the Tube 1, 2 CPM display in the Tube Settings to check which tube has the problem.
Go to Top of Page
Reply #8

Badger

USA
4 Posts

Posted - 11/15/2019 :  16:26:41  Show Profile  Reply with Quote
It’s spiking on both the device and map as they stay in sync well, but I’ve been focused on the physical device as the alarm keeps going off...

I’m not sure exactly how to determine which tube is the culprit, but it’s always been on Tube 1, 2, CPM mode. I did select Tube 1 only and the activity and CPM stayed the same (spiking). Then I selected Tube 2 only and the led/chattering indicator stayed the same noise-wise, but the CPM count on Tube 2 is 0-2. So assuming Tube 1 is the issue?
Go to Top of Page
Reply #9

EmfDev

2131 Posts

Posted - 11/15/2019 :  16:40:30  Show Profile  Reply with Quote

You can display both Tube CPM at the same time. Once the alarm goes off, you can check which tube went up.

Since the device is defective, you can return to us for repair/warranty. Since when you purchased the device? Or maybe we can send you a replacement for the tube. Im not sure if you need to purchase it though.
Go to Top of Page
Reply #10

Badger

USA
4 Posts

Posted - 11/17/2019 :  11:11:26  Show Profile  Reply with Quote
I finally discovered that I needed to put the unit in Large Format display mode to see both tube results. It appears that CPM1 is the culprit. CPM2 is not registering any CPM. I purchased the item new in April 2018 and have already sent it in once for repair. I can't seem to dig up those emails/records though. I sent an email to support last Friday and will wait for a reply unless you have any next steps. Thank you for the help!
Go to Top of Page
Reply #11

EmfDev

2131 Posts

Posted - 11/18/2019 :  11:02:54  Show Profile  Reply with Quote
CPM2 should only get 1-3 reading with background. So first we want to make sure if tube 1 can still be used. We need to check if the voltage is right in between its terminals and not too high. Are you able to do that? It should be around 380-400 Volts. If not you can try to decrease the Tube 1 Voltage in percent in the tube settings to see if it stop the spikes.

The last step we want to do is to for you to buy a new tube from us / or send it for repair.
Go to Top of Page
Reply #12

Badger

USA
4 Posts

Posted - 11/19/2019 :  18:39:32  Show Profile  Reply with Quote
I’m not sure I know how to measure the voltage correctly... I have a simple digital multimeter, but only get 34 volts when measuring at both ends of the tubes. I’m simply sticking the multimeter probes through the back of the unit’s tube vent holes on each metal end of the tube. I read up on another forum post for measuring voltage, but don’t have a 1000v setting and don’t really follow the thread. I’m on firmware version 1.2. Can I upgrade that to have the display read out tube voltage? I read another forum thread about a new firmware version having voltage readouts for the 500+.
Go to Top of Page
Reply #13

EmfDev

2131 Posts

Posted - 11/20/2019 :  11:08:02  Show Profile  Reply with Quote
Most likely it's tube issues. It's better to buy a tube and replace yourself than to send us back since you're past the 1 year period. Here is the link to the tube.
https://www.gqelectronicsllc.com/comersus/store/comersus_viewItem.asp?idProduct=4530

Your hardware doesn't support the high voltage reading. But we have new firmware updates also for your unit. We can update it first to see if we can remove the problems. Just email me your serial number.
Go to Top of Page
Reply #14

Pico76

Italy
2 Posts

Posted - 03/26/2022 :  15:56:58  Show Profile  Reply with Quote
Hi Dev
Same issue here. i bought a 500+ in 6 august 2020. Tube 1 signs around 500 while tube 2 i always around 4 or 5. I tried to reset it to factory settings. Than i turned voltage from 430 to 370 but still high spikes. Could u tell me pls where to buy and find instruction to install a new tube ? thank you for support.
Go to Top of Page
Reply #15

Pico76

Italy
2 Posts

Posted - 03/26/2022 :  16:06:13  Show Profile  Reply with Quote
To be honest it seems to work properly at 300 volts around 30%, no more spikes at all ;tube 1 22cpm and tube 2 1CPM but i have not a radiation source or another geiger machine to check. Do you think i solved ?
Go to Top of Page
Reply #16

EmfDev

2131 Posts

Posted - 03/28/2022 :  09:43:49  Show Profile  Reply with Quote
Hi Pico, yes those numbers seem normal at 300Volts. There may be inaccuracy with the voltage reading. It may need to be checked for real voltage reading.

To buy a new tube, you can search online for M4011 tubes. Also you can buy from the GQ website.
Go to Top of Page
Reply #17

Sunnshol

USA
2 Posts

Posted - 06/14/2022 :  04:38:58  Show Profile  Reply with Quote
My 600 is spiking. Could it be the same issue? I find no tube display options.
Go to Top of Page
Reply #18

EmfDev

2131 Posts

Posted - 06/14/2022 :  10:16:34  Show Profile  Reply with Quote
Hi Sunnshol, how high is the spike? And how long did you have the tube?
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
GQ Electronics Technical Support Forum © Copyright since 2011 Go To Top Of Page
Generated in 0.11 sec. Snitz's Forums 2000