GQ Electronics Technical Support Forum Active Users: / Visits Today:
Highest Active Users:
GQ Electronics Technical Support Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
Password:
Save Password
Forgot your Password?

 All Forums
 GQ Electronics Forums
 3. GQ EMF EF Meter RF Spectrum Power Analyzer
 Em 390 high EMF
 New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

kulcousy

USA
7 Posts

Posted - 08/17/2019 :  15:16:32  Show Profile  Reply with Quote
I have acquired my meter from an amazon customer friend who cannot understand how to use it.
It seems to be a wonderful product but the emf reading are high. Even in the farmland i get reading pulsing between 0 and 8 mG constantly. The video I watched showed 1.3 mG on an urban street! I reset the baseline but the results are the same.
On this topic, there is a bias with positioning on the emf. These readings occur in the vertical orientation only.
I really want to master this device. I experienced palpitations walking around an apartment building the other day when the rf was at 5mW/m2. My personal preference for emf alert is 2mG but I re-set it to 9 to keep it from constantly beeping.
Thanks for the Great help.
John

edit:
In vertical mode the EMF readings are normal. So that is what I'll use.

EMHS

Edited by - kulcousy on 08/18/2019 09:02:57
Reply #1

EmfDev

2132 Posts

Posted - 08/19/2019 :  09:21:46  Show Profile  Reply with Quote
Hi kulcousy, the sensors are at located close to the of the unti when you hold it vertically, When you are holding it horizontally, make sure the top part(now left when holding with right hand) is same distance to the source.

Edited by - EmfDev on 08/19/2019 09:24:10
Go to Top of Page
Reply #2

kulcousy

USA
7 Posts

Posted - 11/18/2019 :  09:43:25  Show Profile  Reply with Quote
My problems continue. Below is a link to a video which will show the situation.
EMF in the vertical and all in one mode spikes continuously in any environment, including remote farmland. I left my phone behind during the tests. Other meters are included to show that the spikes appear to be coming from the EM390 itself.
Please advise.
https://drive.google.com/open?id=1LGScKGw_sb5skzy0QldsbGsr32Sw6Ohv

EMHS
Go to Top of Page
Reply #3

EmfDev

2132 Posts

Posted - 11/18/2019 :  10:43:50  Show Profile  Reply with Quote
Hi kulcousy, check the speaker from the EMF meter in front of the video. It might be coming from there. Also the EMF sensors are located on the left of the unit(horizontal).
Go to Top of Page
Reply #4

kulcousy

USA
7 Posts

Posted - 11/18/2019 :  13:20:37  Show Profile  Reply with Quote
It's been doing the exact thing for 9 months... everywhere! The readings spike from 0 to 8 mG without exception.

EMHS
Go to Top of Page
Reply #5

EmfDev

2132 Posts

Posted - 11/18/2019 :  13:42:08  Show Profile  Reply with Quote
Ohh you mean even without anything around it, it still spikes?
Go to Top of Page
Reply #6

kulcousy

USA
7 Posts

Posted - 11/18/2019 :  20:53:24  Show Profile  Reply with Quote
Please re-read my posts :)

EMHS
Go to Top of Page
Reply #7

EmfDev

2132 Posts

Posted - 11/19/2019 :  10:23:34  Show Profile  Reply with Quote
I think you can send us the unit back for repair. Please contact customer support for details. Thanks.
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
GQ Electronics Technical Support Forum © Copyright since 2011 Go To Top Of Page
Generated in 0.08 sec. Snitz's Forums 2000