GQ Electronics Technical Support Forum Active Users: / Visits Today:
Highest Active Users:
GQ Electronics Technical Support Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
 Password:
Save Password
Forgot your Password?

 All Forums
 GQ Electronics Forums
 3. GQ EMF EF Meter RF Spectrum Power Analyzer
 Holding the meter		  New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

bobinski

United Kingdom
14 Posts
Posted - 05/12/2019 :  10:09:34  Show Profile  Reply with Quote
I am very, very confused. If I am holding the meter near an electric source I get much higher values than having the meter in exactly the same position and me not touching it.

Am I acting as an antenna?

Can anyone explain?
Reply #1

EmfDev

2143 Posts
Posted - 05/13/2019 :  08:46:34  Show Profile  Reply with Quote
Yes if you are talking about EF reading, our body can act as an antenna.
Go to Top of Page
Reply #2

bizdi

Romania
1 Posts
Posted - 05/20/2019 :  08:47:34  Show Profile  Reply with Quote
Ok, so can we ignore the EF readings that are made with our hands on the device?
This means that in order to obtain a correct EF reading, the device should be left near the source and be observed from 20-50 cm?

I'm having this issue on my desk that has a computer monitor. When i hold the device in hand the readings are 6-700 V/m but if leave the device near the computer monitor and observing it from 20-30cm the value is between 10-20 V/m.

I read the user manual and there is nothing mentioned about this issue.

Another thing that is unclear, the sensors will read their best in a vertical or orizontal position of the device?

Thank you
Go to Top of Page
Reply #3

EmfDev

2143 Posts
Posted - 05/20/2019 :  08:52:19  Show Profile  Reply with Quote
bizdi, that might be because your body is close to other EF sources that the meter, like light bulb, carpet, ETC. It is best if you point the upper part of the device to the source.
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
GQ Electronics Technical Support Forum © Copyright since 2011 Go To Top Of Page
Generated in 0.06 sec. Snitz's Forums 2000