GQ Electronics Technical Support Forum Active Users: / Visits Today:
Highest Active Users:
GQ Electronics Technical Support Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
Password:
Save Password
Forgot your Password?

 All Forums
 GQ Electronics Forums
 3. GQ EMF EF Meter RF Spectrum Power Analyzer
 New to GQ 380 (V2)
 New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

konsuella10

USA
5 Posts

Posted - 04/24/2019 :  17:12:09  Show Profile  Reply with Quote
I am new to this meter and I am confused. I been searching this forum for answers on how to understand these readings and I am confused even more. So to get the a safe reading how my meter should be set up? Please and thank you!
Reply #1

EmfDev

2131 Posts

Posted - 04/25/2019 :  09:54:23  Show Profile  Reply with Quote
Hi konsuella10? I'm sorry have trouble understanding your question.
If you want to directly speak with our support please call (206)-829-8093. Our company is in Seattle.
And you can also email support@gqelectronicsllc.com.
Go to Top of Page
Reply #2

konsuella10

USA
5 Posts

Posted - 04/25/2019 :  14:22:25  Show Profile  Reply with Quote
Thanks I am trying to understand which mode is the best to read RF's in my home?
Go to Top of Page
Reply #3

EmfDev

2131 Posts

Posted - 04/25/2019 :  14:35:24  Show Profile  Reply with Quote
Best one for detecting RF is the RF Browser mode. You can simply test your wifi/microwave/cellphone/tablet with this mode.

Edited by - EmfDev on 04/25/2019 14:36:29
Go to Top of Page
Reply #4

konsuella10

USA
5 Posts

Posted - 04/25/2019 :  16:44:30  Show Profile  Reply with Quote
And how about the RF Alarm? The threshold for the RF Alarm (in uW/cm^2) ideal is? Also which Frequency band should I select since there are 6 modes? Also which Start Frequency I need to use and which end frequency of the current band? Thanks
Go to Top of Page
Reply #5

EmfDev

2131 Posts

Posted - 04/26/2019 :  12:19:55  Show Profile  Reply with Quote
50 mW/m2 or 5uW/cm2 if I it convertion correctly. In RF browser mode, there are no other bands. Are you looking at the RF Spectrum?
Go to Top of Page
Reply #6

konsuella10

USA
5 Posts

Posted - 04/27/2019 :  18:42:37  Show Profile  Reply with Quote
Yes I was looking at RF spectrum. I believe I have high radiation in my home, but the GQ meter is very confusing and I am trying to understand how to get the best reading in my house and find where are the highest readings(I have a 4 y old and I am concerned). Yes I was looking at RF spectrum. Now how is this ALL in one mode works: For example I am getting "high" readings like 3.7 mw/m2 or 4mw/m2 in RF mode but like 0.1 v/m I than EME is 01-0.5mg(normal,mixed). In RF Browser mode the peak now -43DBM is 19.55mw/m2..Is it really bad right?? Thanks
Go to Top of Page
Reply #7

EmfDev

2131 Posts

Posted - 04/29/2019 :  09:03:46  Show Profile  Reply with Quote
The RF Spectrum doesn't have alarm for RF. RF, EF, and EMF are different types of radiations. If AllInOne mode is in RF mode, the "High" means that the RF reading is high. To find where the RF source is coming from, it's better to use the RF Browser instead of the RF Spectrum. But if you want also find where EMF and EF are high, then use the AllInOne mode.
Go to Top of Page
Reply #8

konsuella10

USA
5 Posts

Posted - 05/03/2019 :  09:49:45  Show Profile  Reply with Quote
Thanks now I understand better!
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
GQ Electronics Technical Support Forum © Copyright since 2011 Go To Top Of Page
Generated in 0.06 sec. Snitz's Forums 2000