GQ Electronics Technical Support Forum

GQ Electronics Technical Support Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Save Password
Forgot your Password?

 All Forums
 GQ Electronics Forums
 2.GQ Geiger Muller Counter
 Audio to USB adapter for Geiger counter
 New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  


80 Posts

Posted - 01/23/2021 :  18:23:04  Show Profile  Reply with Quote

Originally posted by ihab17

This is also around 12 euros from ebay + 109 USD for shipping a cable!!!!!!! I couldn't find it on Amazon. Anyone has got an alternative solution that doesn't cost this much?

Your question appeared in another topic, so I moved it to this new topic. If someone in the supply chain for the 'tool' adapter is charging that much for shipping, something is not right. Depending on the receiving software, any USB microphone adapter would work. The receiving software must have an audio input option. I use something close to this device to feed my GMC200 audio output to Radlog software for the Radmon map. This should also work with DataLogger Pro, with a signal level/sensitivity adjustment in the software.

The receiving software for the online map, and possibly other software, requires a COM port (data only) so the 'tool' device is required here if your counter has only an audio output.

GQ also sells the 'tool' device directly; see

I should add that I have had issues with the tool and Win10 updates. I regularly have to re-install the driver.

Edited by - GBG12 on 01/23/2021 18:44:47
Reply #1


80 Posts

Posted - 01/26/2021 :  13:24:48  Show Profile  Reply with Quote
Thanks for the feedback. I'll check
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
GQ Electronics Technical Support Forum © Copyright since 2011 Go To Top Of Page
Generated in 0.17 sec. Snitz's Forums 2000