Active Users: / Visits Today:
Highest Active Users:
GQ Electronics Technical Support Forum
Home
|
Profile
|
Register
|
Active Topics
|
Members
|
Search
|
FAQ
Username:
Password:
Save Password
Forgot your Password?
All Forums
GQ Electronics Forums
1.Geiger Counter World Map(www.GMCmap.com)
Pull realtime count
New Topic
Reply to Topic
Printer Friendly
Author
Topic
staze
USA
23 Posts
Posted - 03/20/2019 : 18:45:52
Just curious if there's an endpoint where I can pull a current count (don't need historical) in json or something similar?
Basically identical to
www.gmcmap.com/gmc-plain-data.asp?Param_ID=YOUR_GEIGER_COUNTER_ID&timezone=TIME_ZONE
Only presenting a single result rather than 500. Maybe just altering that gmc-plain-data.asp to accept a "number" variable and that could be set to 1.
Thanks!
Reply #1
staze
USA
23 Posts
Posted - 03/25/2019 : 19:35:34
Nothing?
Reply #2
EmfDev
2244 Posts
Posted - 03/26/2019 : 08:54:49
I don't think there is.
Reply #3
staze
USA
23 Posts
Posted - 03/26/2019 : 16:44:57
Is this something we could get added? Would be nice for integrations with other systems...
Reply #4
EmfDev
2244 Posts
Posted - 03/27/2019 : 12:03:59
We will take a look into it.
Reply #5
hiro
34 Posts
Posted - 03/27/2019 : 12:24:18
Hi staze, please try the following link:
www.gmcmap.com/historyData-plain.asp?Param_ID=YOUR_GEIGER_COUNTER_ID&timezone=TIME_ZONE
for example:
www.gmcmap.com/historyData-plain.asp?Param_ID=64609518812&timezone=-1
This will pull up the last data entry in our database that your counter sent to us.
Example JSON result: {"time": "2018-05-12 0-24:07:13", "CPM": "18", "ACPM": "30.0", "uSv": "0.12"}
If you need more values or anything else we are always happy to help! Thanks again for using GMC geiger counters.
Reply #6
staze
USA
23 Posts
Posted - 03/27/2019 : 18:04:17
Hi @hiro,
That's great! Thanks!!!
Reply #7
staze
USA
23 Posts
Posted - 02/05/2023 : 17:42:54
@hiro,
This endpoint seems to have disappeared... I'm getting a 404 not found now. Kinda looks like it's been gone for a while, actually. =(
Did the url just change addresses?
Edited by - staze on 02/05/2023 18:14:16
Reply #8
EmfDev
2244 Posts
Posted - 02/06/2023 : 11:14:27
Can you guys check it? The devs changed the time to MST and removed the timezone parameter.
Topic
New Topic
Reply to Topic
Printer Friendly
Jump To:
Select Forum
GQ Electronics Forums
6. True USB programmer ralated topics
5. GQ Power Supply
4. GQ Hot Air Soldering Rework Station
3. GQ EMF EF Meter RF Spectrum Power Analyzer
2.GQ Geiger Muller Counter
1.Geiger Counter World Map(www.GMCmap.com)
--------------------
Home
Active Topics
Frequently Asked Questions
Member Information
Search Page
GQ Electronics Technical Support Forum
© Copyright since 2011
Generated in 0.06 sec.
Snitz's Forums 2000