GQ Electronics Technical Support Forum Active Users: / Visits Today:
Highest Active Users:
GQ Electronics Technical Support Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Save Password
Forgot your Password?

 All Forums
 GQ Electronics Forums
 4. GQ Hot Air Soldering Rework Station
 GQ-5200 Error code 1
 New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic   


1261 Posts

Posted - 12/03/2011 :  22:33:33  Show Profile  Reply with Quote
The Error 1 means the unit is unable to heat the hot air element.

It could be the element contacting bad or broken.

In this case you need to open the handle and check the hot element. To see if its connector open or element is broken.

If the element is broken, replace it with the backup element.

Once the new element installed, the starting temperature should be keep low for at least 10 minutes with a higher air volume, then turn the temperature little higher for another 10 minutes with a higher air volume.

This gradually increase temperature just let a new hot element be completely oxidized.
  Previous Topic Topic   
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
GQ Electronics Technical Support Forum © Copyright since 2011 Go To Top Of Page
Generated in 0.05 sec. Snitz's Forums 2000