| T O P I C R E V I E W |
| westpacsailor |
Posted - 03/30/2026 : 07:41:35
The GMC rad map data updates appear to have stopped at or about 2026-03-29 18:32:31 ACT/CDT/EST/PET.
My own station can connect to the servers, and is sending data, but the last data shown is at 2026-03-29 18:17:33 ACT/CDT/EST/PET. The update interval is 5 minutes, and nothing new is showing as of 2026-03-30 10:40:00 ACT/CDT/EST/PET
|
| 37 L A T E S T R E P L I E S (Newest First) |
| Bobofruit |
Posted - 04/23/2026 : 12:55:34
Now it works. Thank You!
|
| 3z_phoenix |
Posted - 04/21/2026 : 23:16:59
sorry EmfDev, i was some days complete offline.
I checked my history data now, and it looks like working.
since timestamp: 2026-04-21 05:33:33
my counter-updates are listed.
good work, thanks alot!
kind regards, 3z_phoenix
|
| zebra14 |
Posted - 04/21/2026 : 01:46:45
Hi EmfDev - looks like you fixed it. My data history is now logging new up-to-date data. There is missing data from 2026-03-29 23:32:27 to 2026-04-17 13:05:44, but that's OK as long as it's now working as it should. Thank you! |
| big_bum |
Posted - 04/20/2026 : 23:40:34
Hi, all good now! |
| EmfDev |
Posted - 04/20/2026 : 14:16:48
can you please check if it is still not working? |
| big_bum |
Posted - 04/20/2026 : 02:48:00
I'm also stuck at 29/03 for about 20 days |
| Bobofruit |
Posted - 04/16/2026 : 15:06:52
My Device ID: 19529350570 |
| EmfDev |
Posted - 04/16/2026 : 11:06:06
can you send me your geiger counter id? |
| Bobofruit |
Posted - 04/16/2026 : 10:21:22
My GQ500+ is sending data to GQserver because it is configured to do it. |
| EmfDev |
Posted - 04/16/2026 : 10:14:56
hi bobofruit, did you use api to send data to the server? |
| EmfDev |
Posted - 04/16/2026 : 10:13:07
hi 3z_phoenix can you send me your device id? thanks. |
| Bobofruit |
Posted - 04/16/2026 : 10:12:31
I can not understad what is going on with all off data.
In my Home Assistant I can see actual data (see below). HA gets data from GQ servers and it shows data till today. It is OK.
When I open www gmcmap and look for my GQ 500 it shows below picture. (It is OK)
But if I want to see historical data on www.gmcmap it shows records only till 03/29/2026. Where are are data records from april? (see below)? Why I can not see it?
Why my HomeAssistant can get those data from GQ server and I can not see the same data from april on webpage gmcmap? |
| 3z_phoenix |
Posted - 04/16/2026 : 02:07:44
quote:
Originally posted by EmfDev
should be working by now..
hmmm, i have to sorry EmfDev,
but my history data still stuck :(
History Data
Date (GMT-7:00) CPM ACPM uSv/h Latitude Longitude
2026-03-29 23:31:46
kind regards, 3z_phoenix |
| EmfDev |
Posted - 04/15/2026 : 10:07:19
should be working by now.. |
| zebra14 |
Posted - 04/11/2026 : 14:22:17
Yes, as 3z_phoenix says above, while the map shows today's date, when I click on my history data - the last date is 2026-03-29 23:32:27
So we're getting there... Thank you whomever is responsible! A little more and we should be good to go! |
| 3z_phoenix |
Posted - 04/11/2026 : 11:43:38
nope, my history data still stuck.
well, maybe have also to wait over night... |
| rolandet |
Posted - 04/11/2026 : 11:21:58
Been getting data since about 7pm EST last night (4/10/2026). So for me things look like they are back to normal.
 |
| 3z_phoenix |
Posted - 04/10/2026 : 22:02:07
quote:
Originally posted by rolandet
I see one reading from yesterday for my sensor so it looks like someone is working on it. The map data is still not updating. At least for my sensor.
yep, thanks alot, map looks like working, but as rolandet stated
my history data still stuck at timestamp: 2026-03-29 23:31:46
|
| NXR71 |
Posted - 04/10/2026 : 18:13:08
The map started working on the 9th for me. My device is showing up with current data.
Maybe now we can hope for the legend to get moved to the lower left so we can use all of the arrows!
|
| rolandet |
Posted - 04/10/2026 : 06:31:55
I see one reading from yesterday for my sensor so it looks like someone is working on it. The map data is still not updating. At least for my sensor. |
| zebra14 |
Posted - 04/10/2026 : 02:17:48
Looks like the map is almost working 100%. It's showing yesterday's data today, and when I ask the map to show me any 24 hour results, I only get two in the USA. So thank you whoever is helping - a little more and we'll be golden! |
| zebra14 |
Posted - 04/09/2026 : 12:27:09
Hi EmfDev - your comment above says it "should be fixed now" as of 3-30, however that does not seem to be the case. Are you still around or is there someone else who can get this map back online and working as it should? Many contributors (like myself) would be pleased to see the issue resolved. If you would be so kind, please give the machine a good smack? Many thanks! |
| fmac |
Posted - 04/07/2026 : 11:24:07
Honestly, the backend should be rewritten from scratch, with any modern technology you like. If I recall correctly you use .NET. Please just drop it unless you have a good reason to stick with it.
You may as well open source the backend and get help for free by the community that loves this service!
Also, the hardware should be revisited. Even when it works it's extremely slow to serve data. A 10 bucks VPS would be much faster.
It's a nice service and disruptions like this are sad. |
| NXR71 |
Posted - 04/07/2026 : 10:07:38
Yeah, not good. At the one time when the GMC Map may be most useful it stops working. |
| 3z_phoenix |
Posted - 04/07/2026 : 08:13:12
yes, still worst, the map only show "RADONPRO"-devices ???
where is my GMC-500+ ?
test connection state: successful
looks like the server is alive and reachable....
we slide into a easter-bunny rabbithole :-(
|
| westpacsailor |
Posted - 04/07/2026 : 06:33:30
I deleted my GMC-500+ from my account and attempted to then add it back in. It is not possible to add a new counter as of 07 APR. The Add New tool closes after entering the location and counter type without any effect. Tried Firefox and Edge, with all blockers/filters disabled, also with no success. Appears dead at this time. |
| zebra14 |
Posted - 04/07/2026 : 01:36:16
Still broken with the problem as outlined above |
| westpacsailor |
Posted - 04/06/2026 : 08:53:53
As of 06 APR 1645 UTC, a very few stations are showing up on the map with current update times, however their history data ends at 29 MAR 1832 CDT.
My own station is not shown on the current map, although the GMC-500+ reports SUCCESSFUL using the SERVER test function, and I can sniff the wire and capture good transactions with the GMCMAP server.
Is this a credentials problem of some kind? Do we need to create new accounts and start over? |
| Lexhick |
Posted - 04/06/2026 : 02:50:15
No more update here ..:( |
| zebra14 |
Posted - 04/05/2026 : 03:08:27
I dug into my settings (manage settings) for my account user ID, the model and device ID of the unit I have, it is toggled to publish data. On this page it also has a place to check history data. Clicking on this I get the expected data submission page where I would expect to see data for every 5 minutes, including 5 minutes ago. However the last data I see is: 2026-03-29 18:32:27
Here is a screenshot of the popup window on the map for my unit:
 |
| Tom Johnson |
Posted - 04/04/2026 : 23:41:57
Same problem as mentioned PLUS new password not accepted. |
| zebra14 |
Posted - 04/04/2026 : 01:36:47
If I choose 24 hours, maybe one station shows up in the whole map. If I ask it to show in the last week, the dates on all the stations are 3/29/26, including my own. Using Chrome, Win 10 |
| rolandet |
Posted - 04/03/2026 : 06:07:12
Any update on when this going to be fixed? Still broken as of 4/3/2026 10:00am EST. |
| Radon-222 |
Posted - 04/03/2026 : 00:57:04
Hello i have similar problem my history data stoped on 2026-03-29 23:31:24  |
| stevemFL |
Posted - 04/02/2026 : 09:55:51
My data is also stuck on late on the 29th. My last data was at 23:32:03 UTC on 29 Mar. |
| zebra14 |
Posted - 04/02/2026 : 01:24:23
Still stuck on 3/29/26 |
| EmfDev |
Posted - 03/30/2026 : 10:46:33
should be fixed now. |
