GQ Electronics Technical Support Forum Active Users: / Visits Today:
Highest Active Users:
GQ Electronics Technical Support Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
Password:
Save Password
Forgot your Password?

 All Forums
 GQ Electronics Forums
 3. GQ EMF EF Meter RF Spectrum Power Analyzer
 Old 115VAC wiring w/no GND = High V/m readings?
 New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

Lauerkj

USA
2 Posts

Posted - 01/14/2021 :  20:07:58  Show Profile  Reply with Quote
I have two bedrooms with very similar arrangement of wall plugs, night stands, lamps, etc. One has EF readings near the bed pillows of around 55V/m and the other has EF readings of around 5V/m near the bed pillows! Lamps and clocks are the same. Could it be that the lower EF bedroom is wired with 3 wire plugs (ground wire) and the higher EF room is wired with 2 wire plugs (no ground wire)? I rotated the EMF-390 meter and the above readings are the highest identified for both locations.
Reply #1

EmfDev

2131 Posts

Posted - 01/19/2021 :  15:12:41  Show Profile  Reply with Quote
Hi Lauerkj, those are mostly static EF from the lamp. The lamp has very high EF and can polarize objects around it. Grounding also is better. But <100V/m in static EF is not necessarily bad since they are mostly static.
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
GQ Electronics Technical Support Forum © Copyright since 2011 Go To Top Of Page
Generated in 0.06 sec. Snitz's Forums 2000