GQ Electronics Technical Support Forum Active Users: / Visits Today:
Highest Active Users:
GQ Electronics Technical Support Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
 Password:
Save Password
Forgot your Password?

 All Forums
 GQ Electronics Forums
 2.GQ Geiger Muller Counter
 GMC-500+ website port number other than 80?		  New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

jantman

USA
4 Posts
Posted - 08/25/2020 :  15:17:39  Show Profile  Reply with Quote
Hello,

I just purchased a GMC-500+, and I'm quite excited about it. I'd really like to utilize the feature of logging data via WiFi. I was able to find existing code ( https://github.com/metebalci/gmc600-to-carbon ) for a small Python webserver that receives data from the GMC-500 and logs it to the Graphite/Carbon graphing software (which I already run). Unfortunately, I already have something running on port 80 (the default HTTP port).

Is there any way to have the GMC-500 connect to a "website" on a port other than 80? Normally this would be denoted with a colon in the URL (i.e. 192.168.0.32:8080), but that character isn't even available in the GMC-500+ input...

Thanks in advance for any help,
Jason
Edited by - jantman on 08/27/2020 12:04:13
Reply #1

EmfDev

2143 Posts
Posted - 08/27/2020 :  12:32:17  Show Profile  Reply with Quote
Hi jantman, the current firmware version does not support changing the port#.
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
GQ Electronics Technical Support Forum © Copyright since 2011 Go To Top Of Page
Generated in 0.06 sec. Snitz's Forums 2000