GQ Electronics Technical Support Forum Active Users: / Visits Today:
Highest Active Users:
GQ Electronics Technical Support Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
 Password:
Save Password
Forgot your Password?

 All Forums
 GQ Electronics Forums
 2.GQ Geiger Muller Counter
 Add a Datahold function on GMC's possible?		  New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

Geo-Johnny

Austria
161 Posts
Posted - 10/29/2019 :  05:12:52  Show Profile  Reply with Quote
I have an idea, but I do not know if it's possible. ..... Could one program the firmware so that with a short pressure on a key (example Powerswitch) or pressing two buttons together at the same time, the display is frozen? A datahold function. If you press the button briefly again, the normal measuring mode will continue. This feature would be very helpful if the display is being photographed for sharing.
Geiger Counters: GMC320+V5 & GMC500+
Geiger Tubes: M4011; SI-3BG; SBT-9; LND712; SBM-20
Edited by - Geo-Johnny on 10/29/2019 07:21:12
Reply #1

EmfDev

2143 Posts
Posted - 10/29/2019 :  08:51:45  Show Profile  Reply with Quote
There is a screenshot feature in the EMF-390 by holding the 2 middle buttons. It will record a screen photo and will be saved and viewed in the unit. Can also be downloaded with the software. This is a good suggestion and might be added to the GMC-500/600 series.
Go to Top of Page
Reply #2

Geo-Johnny

Austria
161 Posts
Posted - 10/29/2019 :  10:01:18  Show Profile  Reply with Quote
YYYeeeaaahhh, i hope so.
Geiger Counters: GMC320+V5 & GMC500+
Geiger Tubes: M4011; SI-3BG; SBT-9; LND712; SBM-20
Go to Top of Page
Reply #3

Stargazer 40

USA
382 Posts
Posted - 10/29/2019 :  11:58:49  Show Profile  Reply with Quote
Would this save only a single screen shot or three or five? What memory would hold this? Any chance of adding a Micro SDHC card slot to record data on the device and place in file that could be uploaded to analysis software as well as hold screen images?
Stargazer 40
Go to Top of Page
Reply #4

EmfDev

2143 Posts
Posted - 10/30/2019 :  10:30:31  Show Profile  Reply with Quote
For the EMF-390 it had 4 but can be more. It is saved in the memory chip. For now there is no plan on adding Micro SDHC.
Go to Top of Page
Reply #5

Geo-Johnny

Austria
161 Posts
Posted - 10/30/2019 :  10:36:44  Show Profile  Reply with Quote
quote:
Originally posted by EmfDev

For the EMF-390 it had 4 but can be more. It is saved in the memory chip.


That's enough. Please make the firmware and PC software possible for the GMC 500/600 models !!!
Geiger Counters: GMC320+V5 & GMC500+
Geiger Tubes: M4011; SI-3BG; SBT-9; LND712; SBM-20
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
GQ Electronics Technical Support Forum © Copyright since 2011 Go To Top Of Page
Generated in 0.08 sec. Snitz's Forums 2000