GQ Electronics Technical Support Forum Active Users: / Visits Today:
Highest Active Users:
GQ Electronics Technical Support Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
 Password:
Save Password
Forgot your Password?

 All Forums
 GQ Electronics Forums
 2.GQ Geiger Muller Counter
 Which comm port to use for USB connection and how		  New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

singh

India
2 Posts
Posted - 08/15/2019 :  04:04:26  Show Profile  Reply with Quote
I have setup the viewer and logger software on a Windows 7 system, but the meter (300E Plus) is not connecting to the software. Can someone guide with the steps to be followed?

I plan to buy the Pro software version, but I want to be sure that I can connect with USB port first, otherwise it doesn't serve any purpose.
Reply #1

EmfDev

2143 Posts
Posted - 08/15/2019 :  09:08:01  Show Profile  Reply with Quote
Hi singh, you can use any port for your meter. Just make sure the port number is correct.
Once you plugged in your device, check your computer's device manager for the port number. Look under Ports for USB-SERIAL CH340. And use that port number on the data viewer to connect.
Go to Top of Page
Reply #2

singh

India
2 Posts
Posted - 08/15/2019 :  11:45:13  Show Profile  Reply with Quote
quote:
Originally posted by EmfDev

Hi singh, you can use any port for your meter. Just make sure the port number is correct.
Once you plugged in your device, check your computer's device manager for the port number. Look under Ports for USB-SERIAL CH340. And use that port number on the data viewer to connect.


Will this work without first buying the pro version of the software?
Go to Top of Page
Reply #3

EmfDev

2143 Posts
Posted - 08/15/2019 :  11:47:10  Show Profile  Reply with Quote
Yes it should work.
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
GQ Electronics Technical Support Forum © Copyright since 2011 Go To Top Of Page
Generated in 0.05 sec. Snitz's Forums 2000