GQ Electronics Technical Support Forum Active Users: / Visits Today:
Highest Active Users:
GQ Electronics Technical Support Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
Password:
Save Password
Forgot your Password?

 All Forums
 GQ Electronics Forums
 2.GQ Geiger Muller Counter
 Question about GMC-320+ and SBM-20 tube
 New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

Searinox_Navras

Romania
1 Posts

Posted - 10/26/2018 :  06:27:42  Show Profile  Reply with Quote
Hello, is a SBM-20 tube installable in the GMC-320+ right off the batt with no extra setup, resistors etc. ie. just putting it in and it works(and ofc recalibration)? Thank you.
Reply #1

EmfDev

2132 Posts

Posted - 10/26/2018 :  12:08:07  Show Profile  Reply with Quote
Hi Searinox_Navras, the SBM-20 tube is a little longer than the M4011 and the clips to hold it to the PCB
is too close to each other to fit it. You have to do some DIY stuff to fit it inside. The case is large enough,
but you need to move 1 of the clips inside.
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
GQ Electronics Technical Support Forum © Copyright since 2011 Go To Top Of Page
Generated in 0.06 sec. Snitz's Forums 2000