GQ Electronics Technical Support Forum Active Users: / Visits Today:
Highest Active Users:
GQ Electronics Technical Support Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
Password:
Save Password
Forgot your Password?

 All Forums
 GQ Electronics Forums
 2.GQ Geiger Muller Counter
 GMC 320 Plus V4 factory settings and time sync
 New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

GER_aki75

Germany
18 Posts

Posted - 09/20/2018 :  14:33:03  Show Profile  Reply with Quote
Hello,
I have one questions about the "GMC 320 Plus V4" and one or two questions about the "GQ Geiger Counter Data Logger PRO" Software

1. If I set the device back to factory settings, are the calibration settings set back to factory settings too, or are they lost and I have to calibrate it myself ?

2a. The logger software gives high readings (above 100 CPM for one count or one minute) when the time sync is done between PC and the device. Is it possible to avoid this bug/issue ?

And question 2b. The time sync of the software can only be set to 1 hour. No matter what number I type in, the number is always set back to 1 hour after restart. Is it possible to set another time than 1 hour ?

Thanks in advance
Achim

GMC 320 Plus V4
GMC 500 Plus
EMF 390

Geigermap Location: 48.348745928343035,10.899212072585215

Edited by - GER_aki75 on 09/20/2018 14:39:12
Reply #1

ZLM

1261 Posts

Posted - 09/20/2018 :  17:24:45  Show Profile  Reply with Quote
1. The factory reset set all configuration data and calibration data to device when you just received. You do not need to re-calibrate it after factory reset.
2a. To avoid that situation, stop the real-time monitoring first, and then sync the time.
2b. One hour for sync the time is a good and recommended period.
Go to Top of Page
Reply #2

GER_aki75

Germany
18 Posts

Posted - 09/21/2018 :  03:21:40  Show Profile  Reply with Quote
thanks for your reply

quote:
Originally posted by ZLM

1. The factory reset set all configuration data and calibration data to device when you just received. You do not need to re-calibrate it after factory reset.


good to know

quote:
Originally posted by ZLM

1. The factory reset set all configuration data and calibration data to device when you just received. You do not need to re-calibrate it after factory reset.
2a. To avoid that situation, stop the real-time monitoring first, and then sync the time.
2b. One hour for sync the time is a good and recommended period.


ok, but still every hour I will get the high readings what is not what I would want to. But allright I just have to remember to set the period to zero everytime I start logging.

GMC 320 Plus V4
GMC 500 Plus
EMF 390

Geigermap Location: 48.348745928343035,10.899212072585215

Edited by - GER_aki75 on 09/21/2018 03:24:14
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
GQ Electronics Technical Support Forum © Copyright since 2011 Go To Top Of Page
Generated in 0.08 sec. Snitz's Forums 2000