GQ Electronics Technical Support Forum Active Users: / Visits Today:
Highest Active Users:
GQ Electronics Technical Support Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
Password:
Save Password
Forgot your Password?

 All Forums
 GQ Electronics Forums
 4. GQ Hot Air Soldering Rework Station
 GQ 5200 intermittent power on problem
 New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

rddube

Canada
18 Posts

Posted - 04/15/2018 :  05:02:17  Show Profile  Reply with Quote
Hi,

I love my GQ 5200 station and it's been working fine for over 2 years now. Recently, when I turn on the iron, I get no display...I have to flip the switch back off and on again once or twice before it starts.

Is this just a switch problem that might need cleaning or should I be looking at something on the circuit board?

Many thanks for your help!

Raymond
Reply #1

rddube

Canada
18 Posts

Posted - 05/10/2018 :  01:23:22  Show Profile  Reply with Quote
Never mind, I fixed it myself. Turns out the power switch was defective so I cleaned it with de-oxit and all is back to normal.

Still would be nice do know there is support for this station. I wonder why ZLM doesn't answer??

Raymond
Go to Top of Page
Reply #2

ZLM

1261 Posts

Posted - 05/10/2018 :  12:46:25  Show Profile  Reply with Quote
sorry for missed your post. But great to know you have fixed the problem.
Go to Top of Page
Reply #3

Betty Hunt

India
15 Posts

Posted - 05/08/2019 :  05:03:24  Show Profile  Reply with Quote
I had quite amazing experience of using my GQ 5200 station for soldering.
But there's a constant 60hz hum coming out of it, which irritates sometimes!
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
GQ Electronics Technical Support Forum © Copyright since 2011 Go To Top Of Page
Generated in 0.06 sec. Snitz's Forums 2000