GQ Electronics Technical Support Forum Active Users: / Visits Today:
Highest Active Users:
GQ Electronics Technical Support Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
Password:
Save Password
Forgot your Password?

 All Forums
 GQ Electronics Forums
 2.GQ Geiger Muller Counter
 New tool to control the GQ GMC Geiger Counters
 New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

chaim-zax

Netherlands
1 Posts

Posted - 09/03/2017 :  09:14:19  Show Profile  Reply with Quote
Today I've released a python based tool to control the GQ GMC Geiger Counters. This tool provides a convenient cross platform (Linux, Windows & OS X) command line user interface to most of the device features (which are accessible by USB). Currently the GMC-280, GMC-300, GMC-320 and GMC-500 models are supported.

The implementation of the tool is based on GQ-RFC1201 (http://www.gqelectronicsllc.com/download/GQ-RFC1201.txt), and testing was done on a GQ GMC-500. It possible some incompatibilities exists with other GQ GMC devices. Any help to test and debug these devices is welcome, and will only improve the quality of this tool.

You can find the tool and all code here:
https://github.com/chaim-zax/gq-gmc-control

Edited by - chaim-zax on 09/08/2017 09:16:17
Reply #1

ZLM

1261 Posts

Posted - 09/30/2017 :  21:27:48  Show Profile  Reply with Quote
Good job. Thanks.
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
GQ Electronics Technical Support Forum © Copyright since 2011 Go To Top Of Page
Generated in 0.06 sec. Snitz's Forums 2000