GQ Electronics Technical Support Forum Active Users: / Visits Today:
Highest Active Users:
GQ Electronics Technical Support Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
Password:
Save Password
Forgot your Password?

 All Forums
 GQ Electronics Forums
 2.GQ Geiger Muller Counter
 Cannot set Period Time freely on GMC-500
 New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

igordashaar

2 Posts

Posted - 08/23/2017 :  14:15:48  Show Profile  Reply with Quote
Hello,

I recently received a GQ GMC-500. For a few days I have now been updloading the read data directly to gmcmap.com. I now wanted to increase the value for 'Period' in the 'Server' settings. Unfortunately when changing it to any value bigger than 3, I do not see any data being sent at all (I tried 4, 5, 6, 9, 10). I tried to set this through the device menu and via GQ GMC Data Viewer. Same both time. I also used 'Test Connection' with these settings and it always replies with 'Succesfull'. After that test I see the value on gmcmap.com.

Any suggestions what I may be doing wrong? Or is it a bug? Or a feature?

Edited by - igordashaar on 08/23/2017 14:17:25
Reply #1

ZLM

1261 Posts

Posted - 08/23/2017 :  20:25:48  Show Profile  Reply with Quote
The current firmware only allow to set between 1 - 3.
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
GQ Electronics Technical Support Forum © Copyright since 2011 Go To Top Of Page
Generated in 0.06 sec. Snitz's Forums 2000