GQ Electronics Technical Support Forum Active Users: / Visits Today:
Highest Active Users:
GQ Electronics Technical Support Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
Password:
Save Password
Forgot your Password?

 All Forums
 GQ Electronics Forums
 2.GQ Geiger Muller Counter
 SBT-11A works in parallel with stock tube!
 New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

v3ngence

USA
3 Posts

Posted - 03/21/2017 :  19:37:41  Show Profile  Reply with Quote
Modded my GMC-320 with a SBT-11A, big increase in sensitivity!

I just wired it parallel with the stock tube. Looks like the circuit handles it fine.

I plan to make a probe handle and wire it with a bnc socket so it can be removed, that way I can keep the portability and connect the alpha probe when needed.

I think I'll keep the SBT-11A connected most of the time, the sensitivity is very good, plus the ionization flashes are so cool!

h**p://www.youtube.com/watch?v=_3MVGWw54bs

Reply #1

ZLM

1261 Posts

Posted - 03/22/2017 :  09:45:17  Show Profile  Reply with Quote
Good.
Go to Top of Page
Reply #2

Distelzombie

Germany
202 Posts

Posted - 03/23/2017 :  08:27:50  Show Profile  Reply with Quote
I did the same. But for the sake of some kind of calibration, I usually have the m4011 tube removed. How do you even calibrate two different tubes that spaced so much apart?

GMC-300E+ V4.20 with sbt-11a alpha tube

My statements are "stuff-a-hobbyist-says" and not in any way professional.
Go to Top of Page
Reply #3

v3ngence

USA
3 Posts

Posted - 03/23/2017 :  11:52:42  Show Profile  Reply with Quote
I was wondering about calibration, it would be a pain to enter different values every time, so I think I'll leave the stock value and just measure some known sources with the SBT-11A so I can manually convert.

I think I'll wait until I make a long probe so the source won't affect the stock tube and alter the reading.
Go to Top of Page
Reply #4

Distelzombie

Germany
202 Posts

Posted - 03/24/2017 :  08:20:36  Show Profile  Reply with Quote
But that would always interfere with the reading. You cant be sure the stock tube is not picking up some gamma down there. And what would that even be useful for? You can and will measure background with the sbt tube as well and probably better.
I would add a switch to the internal tube too.

GMC-300E+ V4.20 with sbt-11a alpha tube

My statements are "stuff-a-hobbyist-says" and not in any way professional.
Go to Top of Page
Reply #5

the_mike

Switzerland
53 Posts

Posted - 03/25/2017 :  14:03:32  Show Profile  Reply with Quote
I think it would be best if you could build in a "switch" to ..switch (poor choice of words sry) between the M4011 and the BNC...
edit: as you'd always pick up gammas with the built-in as described before

(anyway - pls post your plans etc as I, a non-electrician, want to do a similar project with my GMC320, but have no clue on how to do it ;-)

Edited by - the_mike on 03/25/2017 14:04:18
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
GQ Electronics Technical Support Forum © Copyright since 2011 Go To Top Of Page
Generated in 0.08 sec. Snitz's Forums 2000