GQ Electronics Technical Support Forum Active Users: / Visits Today:
Highest Active Users:
GQ Electronics Technical Support Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
 Password:
Save Password
Forgot your Password?

 All Forums
 GQ Electronics Forums
 2.GQ Geiger Muller Counter
 Difficulty with display type on GMC-320		  New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

radrunner44

USA
2 Posts
Posted - 10/20/2014 :  14:04:33  Show Profile  Reply with Quote
I have a new GMC-320. When in the menu to select the display type, the unit "times out" before I can press the up or down buttons to scroll through the choices. Can this timeout be changed, or is this maybe a known issue? Further, sometimes, the display type will spontaneously change from one to another, eg. if I am in large font and testing a sample, it will frequently simply change to either text or graphic without my input. I have even seen it almost scroll through all three choices while testing. Any ideas? Thanks
Reply #1

ZLM

1261 Posts
Posted - 10/20/2014 :  21:24:20  Show Profile  Reply with Quote
For the problem on "spontaneously change display type", turn off the motion detection in the menu. Little vibration may trigger the motion detector.

The popup window timeout will be fixed in the later firmware.
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
GQ Electronics Technical Support Forum © Copyright since 2011 Go To Top Of Page
Generated in 0.05 sec. Snitz's Forums 2000