I purchased and downloaded the Logger software but all it shows ia a flat line.Data Viewer seems to work fine but I want to use the auto-save feature. I downloaded it twice, the second time turning off the firewall and virus software. Not sure what I am doing wrong. Is there a manual for the software?
Thanks...software was purchased and shows as registered. I am on the correct port but there is no reference on correct settings. What is the baud rate I could be using? I see this in the readout box:
COM7 opened successfully. Heartbeat started.. Realtime monitoring started. connected on COM7@38400. USB data input selected.
USB data input selected.
COM7 opened successfully. Heartbeat started.. Realtime monitoring started. connected on COM7@38400.
Update: I discovered by experimentation that the baud rate should be 57600 and as soon as I made that adjustment my counter connected and began graphing. ]
The GMC-200 uses 38400 baud rate. The GMC-300, 300E uses 57600 baud rate. The GMC-320 default baud rate is 115200, but it can be changed from the menu.