GQ Electronics Technical Support Forum Active Users: / Visits Today:
Highest Active Users:
GQ Electronics Technical Support Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
Password:
Save Password
Forgot your Password?

 All Forums
 GQ Electronics Forums
 2.GQ Geiger Muller Counter
 M4011 DATASHEET
 New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

Callisto

Italy
1 Posts

Posted - 10/25/2012 :  05:29:14  Show Profile  Reply with Quote
where can I find the datasheet of the M4011 ?
Measurements of the my GMC 300 are not consistent with actual measurements
Reply #1

Benezi

15 Posts

Posted - 11/12/2014 :  14:51:43  Show Profile  Reply with Quote
A datasheet of the M4011 would help a lot!
Does anyone knows a source?

Thanks a lot,
Benedikt
Go to Top of Page
Reply #2

Craig

USA
22 Posts

Posted - 01/21/2015 :  21:36:37  Show Profile  Reply with Quote
Hi Callisto and Benezi.

Yes: that should be the very first question.

By Googling M4011 + specifications, you end up with incomplete specifications such as at:
> h**p://m.aliexpress.com/item-desc/1790161282.html

--and GQ's own posted specs at:
> h**p://www.ebay.com/itm/New-High-Sensitivity-M4011-Geiger-Counter-Tube-/260835055100?hash=item3cbafb15fc&pt=LH_DefaultDomain_0#ht_928wt_862

* We get a noise figure of "0.2cps" = 12cpm (which no one wants to talk about), but nowhere do we see the stated gamma sensitivity. I see companies which use LND G-M tubes stating sensitivity in a calibrated 1000uR/hr field of cesium-137 radiation --which lobs the count way above any contested levels of internal noise and/or local "background" levels. Those of us doing low level background monitoring then interpret (say) a spec of 3500cpm at 1000uR/hr --to meaningfully indicate 10 uR/hr (0.10 uSv/hr) at 35cpm.

* For what it's worth, using GeigerGraph-4.3 software and the GQ supplied USB adapter cable, I carefully compared the response of a GMC-200 to a Medcom "Inspector" Geiger counter --in a typical (one meter above the ground) outdoor field of background radiation here --and came up with 16cpm at 0.10 uSv/hr --for what I take to be gamma --but who knows what percentage is actually cosmic/muons and internal G-M tube noise? At least that 16cpm should put you on the same page with everyone else --confused as we all might be about what we're actually counting.

* It appears that GQ Electronics software sets an M4011 tubes response to 10 uR/hr at 20cpm. (I don't think the difference is a big deal.)


Craig

Go to Top of Page
Reply #3

Nudnik

40 Posts

Posted - 03/11/2016 :  03:55:08  Show Profile  Reply with Quote
According to government sources we have a background of 77nSv/h ( h**p://sfws.lfrz.at/)
According to the data sheet tube noise is at 0.2cps which is 12cpm.

At the given background radiation of 77nSv/h my GMC320 shows 19cpm.
Now, if I take the tube noise into consideration this would mean 19 - 12 = 7cpm = 77nSv/h

So, either tube noise data are wrong or the tube is crap (at least unusable for background measurement)

Am I missing something?
Go to Top of Page
Reply #4

ZLM

1261 Posts

Posted - 03/11/2016 :  11:23:07  Show Profile  Reply with Quote
For the tube noise 0.2cps means average. The true value can be 0 - 24. The calibration process should cover this variation.

Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
GQ Electronics Technical Support Forum © Copyright since 2011 Go To Top Of Page
Generated in 0.11 sec. Snitz's Forums 2000